As for how to change the name of a Wi-Fi network, ordinary users usually never think about it. By and large, they do not need this, since very often the initial configuration is performed by a specialist from the provider's service. But in the case of mobile operators, when specially designed for this firmware modems are used to create a connection, which can operate in the mode of distributing a wireless signal, you have to set the parameters yourself. And often you need to follow the instructions of the operator, setting well-defined options. However, changing the network name is often necessary. But can it be done, and if so, how?
Can I change original Wi-Fi network names?
Indeed, to begin with, let's determine how generally it is possible to perform suchactions. Of course, probably, many people noticed that when the same connection setup specialist invited by the provider sets up the required options, very often you are asked questions about entering the preferred connection name. You, of course, choose what you like, and then the assigned name and is displayed in the list of networks available for connection after the automatic search is completed on a computer or mobile device. Thus, you can change the SSID (the same network name) without problems. As it turns out, this applies equally to those cases when personalized modems of mobile operators are used (only the parameters for accessing services cannot be changed in them).
How is the network name assigned when setting up the first connection?
If you were setting up the connection yourself, you would definitely notice that almost all routers, even if you don’t specifically set the connection name in them, after setting the required parameters, they will be displayed in the list of available networks with the default name, which either exactly matches the modification of the router or modem, or consists of a specific set of characters.
This is not always convenient, especially since there is absolutely no guarantee that exactly the same router is not installed at your neighbors, and they also did not configure it manually, without paying attention to assigning the original network name (further it will be clear, with which suchproblem).
What can change the network name affect? Nuances
Before talking directly about how to change the name of the Wi-Fi network, let's see how this can affect the performance of programs or other connected devices. In principle, such changes do not affect the operating system at all. Sometimes, however, there may be some problems using applications for remote access, but most applets of this purpose automatically recognize the network to which remote computers connect, and it is usually not necessary to reconfigure their own settings (in this case, we are talking about the built-in remote access service). Desktop" from Microsoft, which is available in any Windows system, and applications of the TeamViewer class). But the users who are allowed to connect to your network will have to rack their brains well, figuring out a new name. And if you also change the password, access will be blocked altogether. In addition, please note that if you use a wireless connection not only from a computer or laptop, but also from your mobile device, you will also have to perform a new search on it and then connect.
How to change the name of the Wi-Fi network directly on the router?
Finally, having de alt with brief theoretical information, let's proceed directly to adjusting the settings. In principle, if you are wondering how to change the name of the Rostelecom Wi-Fi network or any other provider (operator), all actions come down to performinga few simple operations right in the router's web interface.
To log in, you will need to use any browser at your disposal (yes, even Internet Explorer). In the address bar for most known devices, the address is set to 192.168.0.1 or the same combination, but ending in 1.1, and admin is entered twice for the login and password (the exact information can be found on the label on the bottom of the device).
After that, go to the wireless mode parameters in the router interface. Here, in the network name field, which can be designated SSID, the current name of the connection will be shown, which can be changed to any other by entering the desired combination, but using EXCLUSIVELY Latin letters and symbols. After that, you just need to save the changes by clicking the confirmation (save) button.
You can also change the Wi-Fi password if necessary. However, this will require you to move to the next section, commonly referred to as wireless security settings.
The PSK password field will show the current combination used to authenticate when connecting. As in the previous case, you can change it and save the installed options, then reboot the router.
Recommendations and important nuances when troubleshooting connection problems
So, how to change the name of the Wi-Fi network,figured it out. As additional material, it is worth giving a few practical tips and recommendations that will help avoid errors and failures:
- when entering a network name, never use Cyrillic (Russian) characters and spaces;
- do not enter too long names (as a result, some network devices with such names may not be detected);
- try to use special characters like, &, $ and others in the name as little as possible;
- do not use names of the same name that are already within the range of your router (otherwise, even if you have different access passwords, there will be confusion with the connection);
- never enter information that could theoretically display your personal data (dates of birth or something like that).
Finally, if after renaming it is impossible to connect to the network or determine it, try to restore the previous settings and be sure to hard reset the device.
If this does not help, use the factory reset section, perform a full reset, and then set up the connection again by setting the options provided by the provider or mobile operator.
