As part of this short review, we will consider the phased overclocking of the AMD processor. Programs allow this operation to be performed as quickly and simply as possible. Therefore, most computer specialists use the appropriate software for these purposes. It is on the example of special software from the developer company that the material will be presented in the future.
What is it for?
What does AMD processor overclocking ultimately give? The program allows you to increase the clock frequency of the CPU. Although the latter is not a determining factor, it still significantly affects the performance of the computing system as a whole. The higher the frequency of the microprocessor, the more data and instructions it can process in one cycle of operation. And the faster he is able to complete the task assigned to him.
AMD concept
Most microprocessors today from such a well-known manufacturer as Intel come with a locked multiplier. That is, these chips are initially impossible to overclock. In turn, the existing AMD lineup is fundamentally different in this regard. Almost all microprocessors from this manufacturer have an unlocked multiplier. Therefore, overclocking an AMD processor is quite simple. It is extremely problematic to find a program in Russian to perform this operation. But the interface of the proprietary Amd OverDrive utility is as simple as possible; it will not be difficult for a novice computer specialist who has decided to increase the performance of a personal computer to understand it. But its interface can only be found in English. That's her only flaw.
Computer Requirements
Before choosing a program for overclocking an AMD Athlon or any other processor, let's define the requirements that are put forward to the hardware of the computing system. Again, in the case of increasing performance by increasing the nominal CPU clock speed, the personal computer must be specially equipped.
First of all, the power supply must have a large power reserve. For example, its value should be 1 kW or even 1.2 kW. Also, the motherboard of a personal computer should be based on an improved chipset and have an improved power supply layout. It would also be usefulthe presence of solid capacitors instead of conventional electrolytic ones. To maximize the speed of your PC, it is recommended to install RAM modules with as high a frequency as possible.
Separately, it is necessary to note the requirements for the cooling system. The stock cooler included in the scope of delivery is designed for CPU operation only in nominal mode. Therefore, to overclock the microprocessor, an advanced cooling system is needed. Moreover, to achieve maximum results, it is recommended to use such devices based on liquid cooling. If you plan to achieve not so great results, then you can get by with an improved air cooler.
Selection program
You also need to choose software to perform this operation. Conventionally, such software can be divided into two large groups. The first of them includes utilities developed by manufacturers individually for their own model range of motherboards. That is, for example, ASUS develops certain software for its products. And such software can work stably only with its products. Similarly, MSI provides the user with its own set of utilities. This approach is not very convenient. When changing the manufacturer of the motherboard, the user will be forced to deal with the interface of the supplied software again.
Therefore, it is preferable to use universal software in this situation. For example, a program designed for overclocking an AMD FX processor is ideallysuitable for these purposes. It is developed by the hardware manufacturer, is completely free and can be downloaded without any difficulty from the official Analog Micro Device website. In addition, it has a universal interface and does not depend on which motherboard is used in the PC. Therefore, it is strongly recommended to use it when increasing the speed of a personal computer with AMD chips.
General overclocking algorithm
After choosing the most optimal program for overclocking the AMD 64 processor, we will decide on the order of increasing PC performance by increasing the CPU clock frequency. The algorithm in this case includes the following basic actions:
- Download the OverDrive utility from the official website of the manufacturer.
- Install it by following the instructions of the installation wizard.
- Then it is recommended to restart the computer.
- At the next step, run the previously installed program.
- After opening its interface, go to the "Perfomance" tab. Next, you need to open the "Clock/Voltage" section.
- In the lower right corner of the interface that opens, there is a "Clock" section. In it, check the box "Select Cores". Then drag the multiplier slider below it by 2-3 values up and click "Apply". After that, the changes will take effect.
- Next, move to the “Test” tab. Run a PC stability check on it. If everything is fine, then return to the previous tab andincrease the value of the multiplier again. Otherwise, the test result will be negative. In this case, it is necessary to increase the voltage on the “Clock/Voltage” tab and re-check the operation of the computer.
- By increasing the frequency and voltage of the CPU, you need to reach the moment when the PC stops working stably. After that, we return to the previous value and save the parameters. We check once again the stability of the computer. And exit the program.
You need to focus on frequency values of 4.2-4.4 GHz and voltage of 1.42-1.425 V. Experience shows that when these values \u200b\u200bare reached, the modern AMD Ryzen CPU gives maximum speed. It is unacceptable to exceed the previously indicated values \u200b\u200bfor the reason that the PC in this case may begin to function unstable.
Checking the performance and stability of the computer
AMD processor overclocking through the program is basically over. Now, using third-party utilities, it is recommended to additionally check the overall stability of the PC. To do this, it is recommended to download AIDA 64. Next, this utility is installed and launched. In its main menu, you need to select the "Service" item, and in it - "Stability Test". Set the checkboxes in front of all PC elements and start the check using the "Start" button. At the end of the test, we study the results. If the PC works stably, then we exit the program and the computer can now be operated. Otherwise, we return to OverDrive and reducefrequency and voltage of the central chip and check again.
Reviews
Previously, AMD microprocessors could overclock quite significantly. The increase in the speed of their work could reach 25%. Recently, the results are not so impressive. But still, overclocking of AMD processors continues to be relevant. The OverDrive program is designed to make this process as simple as possible for the end user, and it simply does an excellent job with this task. This is exactly how the AMD hardware platform and the software provided to it are now characterized by the owners at the moment.
Conclusion
In this review, the procedure for overclocking an AMD processor was described. OverDrive really made this process as easy as possible. Now anyone can handle such an operation without any problems. But the real increase in performance is highly dependent on the configuration of the PC. The better the components, the higher the final speed of the computer will be.
