Practice shows that the likelihood of a need to connect the hard drive of one of the computer devices to a laptop or the implementation of the opposite reconnect scenario is prohibitively high. A precedent for this may be a suddenly or naturally manifested "digital trouble" … The methods described in the article are designed to help the "puzzling user" in solving the often encountered difficulty, how to connect a laptop hard drive to a laptop. Undoubtedly, valuable material, consisting of exceptionally effective recommendations, will affect all options for interface-interaction of various types of information storage devices in order to obtain full access to the data located on them.
Discord in the single purpose of the hard drive: a threat to a he althy psyche
Wowhow confusing! Stationary computers are equipped with one type of storage, laptops and a separate type of computing devices with the NET prefix - with another. However, all these devices have a single universal ability - the storage and processing of information. So, the “interface-differences” when deciding how to connect a hard drive from a computer to a laptop can be bypassed. And also to avoid the often occurring (for the “victim of technological circumstances”) state of mild confusion, when the hard drive of a failed PC contains urgently needed data that is needed “right now”. Relax, dear reader, there is a way out! Take a breath… and not even in a single version!
How to connect a hard drive to a laptop: instructions for SATA devices
Let's look into this situation in detail: there is a working laptop to which you need to connect an HDD from a PC.
- First of all, you need to purchase a special SATA-eSATA adapter, the choice of which must be guided by the technical characteristics of the receiver device. In our case, this is the presence of a “favorable” eSATA connector on the laptop.
- Most modern portable configurations have this interface. Which in the end will become a kind of answer to the question of how to connect a hard drive to a computer or laptop.
If your laptop has this type of interface, then the further initialization process takes place almost instantly. Operating systemliterally immediately detect the connected device as an external drive. Moreover, the speed of work when organizing this kind of synchronization process is incredibly high, up to 6 Gb / s. Agree, with such parameters, you can quite comfortably interact with data of any (within reasonable limits) volume.
Manual for IDE Hard Drives: Universal USB Port
How to connect a hard drive to a computer (laptop) if the drive has a somewhat outdated interface, and the laptop has only a universal USB connector? Undoubtedly, quite a "complex symbiosis". However, as mentioned earlier, there is a way out!
- Everything is resolved with a special adapter that connects to a laptop using a USB cable.
- The IDE input connector of the device allows you to connect a PC hard drive, and a separately output cable is used as a power limit switch.
As a rule, such devices are often universally used gadgets. Since they often provide two types of connection - SATA-USB and IDE-USB - using one controller adapter.
"Brotherly understanding": two cords decide everything
You will not have a question how to connect a laptop hard drive to a laptop if your laptop has the previously mentioned serial interface, and your "reconnect" arsenal has an eSATA to SATA (7+15 pin) adapter. Otherwise, you should pay a visit to the nearest electronics store and buy an inexpensive "pocket"for external HDD.
This option is the most appropriate for the optimal solution of the voiced difficulty. Since the owner of such an HDD container may well use the purchased device (in the future) for its intended purpose - as an additional external storage device.
By the way, the "HDD-pocket" can be connected not only via the eSATA interface, but also via the universally used USB port. Which will make it incredibly easy when you need to connect a 2.5 ̎-drive from a laptop to a desktop PC. Do you see any benefit from such an acquisition?
Climaxing finale: extreme raising of information by "poke" method
When deciding how to connect a laptop hard drive to a laptop, if the situation requires quick access to data on an external hard drive and provided that there is no necessary adapter, but there is a flash drive and access to the Internet:
- Download the Live USB distribution.
- After you create a bootable Flash drive, shut down and power down your laptop.
- Remove the device battery.
- On the back of the laptop, look for the HDD text designation, which is a kind of landmark that indicates the location of the installed laptop hard drive.
- Unscrew the protective cover and carefully pull out the HDD.
- In the freed space, install the hard drive, which stores the information you need (urgently!).
- After you boot from the flash drive, you canget acquainted with the "secret data".
This is how you can get a practical answer on how to connect a laptop hard drive to a laptop. The basic techniques for gaining access to information stored on an external HDD have been fully considered. Good luck and all the best!
